TDS-3 SMART EC/TDS meter and thermometer for water

  • SKU: 004-205-002-TDS3S
The robust TDS-3 SMART meter is suitable for basic assessment of water quality in water purification, hydroponics, industrial wastewater treatment etc. in the range of 0 to 9990 ppm (mg/l).
  • Available immediately
Description

The robust TDS-3 SMART meter is suitable for basic assessment of water quality in water purification, hydroponics, industrial wastewater treatment etc. in the range of 0 to 9990 ppm (mg/l). The unit comes with a black vinyl protective case with belt clip.

Functions:

  • Measurement of electrical conductivity (EC)
  • Measurement of the number of dissolved particles (TDS)
  • Measurement/display range: 0 - 9990ppm
  • Temperature measuring (digital)
  • Automatic temperature compensation (ATC)
  • Hold function: display even after contact with water
  • Memory function for later display of measured values
  • Automatic turn-on function
  • Automatic switch-off after 10 minutes of non-use
  • Factory calibrated with a 342 ppm NaCl solution
  • Digital calibration
TDS range: 0 - 9990ppm (mg/l)
Temperature range: 0-80°C
Resolution/accuracy: 0-999: 1 ppm; 1000-9990: 10 ppm (displayed with ‘x10’ symbol)
Deviation: +/- 2%
EC/TDS conversion factor: NaCl (approx. 0.5)
Temp. compensation (ATC): Automatic Temperature Compensation
Turn-on/switch-off: Automatic turn-on; automatic switch-off after 10 minutes of non-use
Hold function: Display even after contact with water
Memory function: For later display of measured values
Display: LCD
Weight: 6.5 g (2.7 oz) (including protective cover)
Dimensions: 15.5 x 3.1 x 2.3 cm (6.1 x 1.25 x 1 in.)
Power source: 2 x 1.5V button batteries (357A) (included)
Factory calibration: With NaCl 342 ppm, modifiable (digital calibration)
Contact data
Question about item
Others also bought: